Description
2x E-Tech ORANGE Engine Spray On Enamel Paint High Temp Heat Resistant +Caps
- E-TECH Engine enamel is a high quality, long lasting, enamel coating specially formulated with a ceramic resin to cope with temperatures of up to 250°C, and is suitable for use on most engine parts and components.
- Ideal for engine blocks, valve/rocker covers and gearbox/differential casings, plus other engine bay components.
- The spray-on application is simple to apply, quick drying and provides a hard, chip resistant, long lasting finish which will retain its colour due to the high pigment content.
- Long lasting high quality finish.
- Tough chip and crack resistant formula.
- Resists oil, engine additives, chemicals, road salt & weathering.
- Excellent durability.
- No primer needed – strong adhesion to bare steel and metal.
- Colour : Orange.
- Can Size 400ml Each .
- It is a spray on application so quick drying and provides a hard, chip resistant, long lasting finish which retains its colour due to the high pigment content.
- Long term performance of this paint on aluminium and stainless steel surfaces cannot be guaranteed.
- Not suitable for brass and other non-ferrous metals.
- For best results ensure the engine or part you are painting, and the paint are at room temperature before use (approx 17°C to 21°C).
- For best results apply in a warm, dry and dust free area.
- Use a steel brush to remove loose dirt and rust deposits from surface to be painted.
- Then clean the area to be painted thoroughly with a degreaser or steam cleaner, removing all traces of silicone, oil, dirt, grease etc.
- Mask off any area that you do not want to be painted.
- The area to be painted must be completely dry and thoroughly clean before you start.
- Shake can vigorously for a minimum of 2 minutes before use.
- Hold can 20-30cm (8-12″) from surface and spray using a smooth side to side motion.
- Build up layers with several thin coats allowing approximately 15-20 minutes between coats for the surface to dry to a tacky film (do not apply heavy coats).
- Shake can between coats.
- After applying the final coat allow 4 hours for the enamel to dry properly.
The 4Tress Chrome Tyre Valve Dust Caps screw onto the valve stem of a car tire to protect it from dust and debris. These particular caps have a sleek and stylish design with a 4TRESS emblem on the top, and they are made of high-quality chrome material that is both durable and rust-resistant.
The caps are easy to install and remove, and they have a universal fit that can be used on most standard valve stems. They are also lightweight and compact, making them easy to carry in a pocket or glove compartment in case you need to replace a lost or damaged cap.
Overall, the 4 Tree Chrome Tyre Valve Dust Caps are a functional and stylish accessory for any vehicle, providing protection for your tire valves while adding a touch of personality to your car’s appearance. Lubricating valve stems periodically with a small amount of silicone spray or light oil can prevent valve caps from seizing and becoming difficult to remove.
All images are for illustrative purposes only and may differ from the actual product. Product and packaging are subject to manufacturers’ changes without prior notice.
